Model:SF series Stress gauge
Use:These gauges are intended to measure the stress in an optional direction of the specimen in plane stress field.
These gauges are intended to measure the stress in an optional direction of the specimen in plane stress field. The gauges are sensitive not only in these axial direction but also in the transverse direction, and the sensitivity ratio of the transverse direction to the axial directions is equal to the Poisson’s ratio of the specimen material. In addition, the gauges are not sensitive to the shearing strain. Accordingly, the output of the gauges is proportional to the stress in the axial direction. The gauges are available in three types depending on the Poisson’s ratio of the specimen material.
Applicable specimen | Metal |
---|---|
Operational temperature(℃) | -20 to +200℃ |
Temperature compensation range(℃) | +10 to +100℃ |
Applicable adhesive | NP-50B, CN, C-1 |
Backing | Polyimide |
Element | Cu-Ni |
Strain limit | - |
Fatigue life at room temperature | 1 x 106 (±1500 x 10-6 strain) |
主站蜘蛛池模板: 双辽市| 新蔡县| 台安县| 新乐市| 光山县| 虹口区| 娱乐| 木兰县| 芜湖市| 汪清县| 连山| 洱源县| 秦安县| 锦州市| 罗山县| 内黄县| 连州市| 宾川县| 南京市| 吴江市| 肃北| 桓仁| 汨罗市| 夏邑县| 胶南市| 顺昌县| 仙居县| 金平| 雷波县| 眉山市| 周宁县| 永靖县| 融水| 汾阳市| 汉中市| 星子县| 什邡市| 铅山县| 沙湾县| 永新县| 武山县|