Model:F5
Use:The Armfield F5 has been designed to allow the classical experiments conducted by Professor Osborne Reynolds, to be reproduced by students in the laboratory.
The Armfield Osborne Reynolds Apparatus can be bench or floor mounted and is designed for the vertical flow of a liquid through a precision bore glass tube. The use of a vertical direction for the flow compensates for the effect of any small deviations of the density of dye relative to that of the working fluid.
The operating fluid may be supplied from any small bore supply point by means of the flexible hose provided. Fluid enters a cylindrical constant head tank through a ring diffuser and then through a stilling bed to eliminate any gross variations of fluid velocity in the head tank.
This tank therefore provides uniform, low velocity head conditions upstream of the entry to the vertically mounted pipe test section. Fluid enters this section through a profiled bellmouth, designed to uniformly accelerate the fluid without any spurious inertial effects.
The cylindrical pipe test section is mounted inside a fabricated shroud that provides an uninterrupted background for observations of the dye trace behaviour. Dye solution is admitted to the test section through a fine diameter stainless steel tube and the rate of flow of dye is controlled by a needle valve on the outlet of the dye reservoir. The dye injection system can be readily removed for cleaning and maintenance.
The flow rate of the working fluid through the test section is regulated by a globe valve located in the base of the apparatus. The rate may be measured either volumetrically or by weighing (equipment for this purpose is not supplied). The apparatus is compatible with any means chosen to alter the kinematic viscosity of the fluid, either by using different fluids or by altering the temperature of a given fluid (the external circuit for this is not supplied).
The whole apparatus is mounted on a substantial fabricated steel support and a means is provided for levelling the apparatus to ensure the test section is vertical. The stilling bed, all necessary connecting hoses, an initial supply of dye and an instruction manual are supplied with the apparatus.
主站蜘蛛池模板: 新兴县| 花莲县| 英超| 怀仁县| 高青县| 贡嘎县| 岐山县| 红河县| 大邑县| 香港 | 邮箱| 建平县| 准格尔旗| 琼中| 石首市| 淮北市| 普安县| 观塘区| 湾仔区| 香港 | 湾仔区| 黄大仙区| 出国| 日土县| 光泽县| 临武县| 交口县| 衡南县| 秦安县| 镇平县| 永仁县| 左权县| 扎囊县| 莲花县| 沿河| 喀喇| 沧源| 平遥县| 新沂市| 浦北县| 临武县|